HomeRecent Work › Foundation Wall Rebuild — Davenport, IA
Project Update · Foundation Repair

Foundation Wall Rebuild — Davenport, Iowa

CityDavenport, Iowa
ServiceFoundation Repair
MethodCMU Wall Rebuild & New Footing
CompletedJuly 2026

Project summary

Behncke Construction completed a full foundation wall rebuild on a home in Davenport, Iowa. Our crew removed and replaced a 28-foot section of concrete block (CMU) foundation wall, poured a new concrete footing to carry the load, and installed a new 28-foot sill plate to restore the connection between the foundation and the home’s framing. Inside, the team rebuilt damaged areas of a stone partition wall using salvaged stone from the home’s original foundation and finished it with a fresh parge coat.

What we did

This was a structural foundation replacement, not a surface patch. The failing 28-foot CMU foundation wall was taken down and rebuilt on a new concrete footing. A new 28-foot sill plate was set so the home’s weight transfers cleanly onto the new masonry. On the interior, our masons rebuilt the damaged sections of the original stone partition wall, reusing salvaged stone from the home’s own foundation so the repair matched the surrounding stonework, then applied a new parge coat for a smooth, durable finish. Work at this scope takes careful planning, experienced masons, and close attention to structural detail.

What homeowners should know

Not every foundation issue is repaired the same way. In many cases a bowing or cracked wall can be stabilized with steel I-beam bracing. When a wall has moved or broken down beyond what bracing can safely hold, the more durable solution is often to remove and rebuild it on a new footing — which is what a full foundation rebuild involves. A new sill plate typically goes in alongside a rebuilt wall so the load path stays continuous, and a parge coat — the thin mortar finish applied over block or stone — gives the surface a clean, uniform look with an added measure of protection. The key point for homeowners is that a genuine rebuild restores the structure itself rather than just covering a crack. Behncke has relied on the same proven methods and materials for foundation and masonry work in the Davenport area for decades.

Project photos

Photo highlights

The featured photo is from this Davenport foundation rebuild. Additional job photos from this project will be added as they are verified.

Concerned about a failing foundation wall?

Behncke Construction has diagnosed and repaired foundations across Davenport and the Quad Cities since 1948. If you’re seeing bowing walls, foundation cracks, settling, or crumbling mortar, we’ll give you an honest evaluation and recommend only the repair your home actually needs.

Request a free inspection (563) 332-6045