Stucco Repair on an Older Home — Davenport, Iowa

The stucco on an older Davenport home had cracked and was separating from the framing. Behncke Construction removed the failing stucco, prepared the surface, applied new stucco, and matched the existing texture for a seamless transition.

PROJECT SUMMARY

Date posted: October 13, 2026
Service: Stucco repair
Location: Davenport, Iowa
Problem: Cracked stucco separating from the framing beneath on an older home
Solution: Failing stucco removed, surface prepared, new stucco applied with the existing texture matched
Completion status: Completed

Project photos

Repaired stucco wall on an older Davenport home with the texture matched to the existing finish
The repaired wall with the new texture blended into the old.
New stucco applied over the prepared wall section
New stucco applied to the prepared section.
Failing stucco removed showing the framing and sheathing beneath
The failing stucco removed down to the structure beneath.

Project overview

This older home in Davenport, Iowa had stucco with several cracks, and sections were beginning to separate from the framing underneath. Patching over it would not have held.

Project details

The crew removed the failing stucco down to the structure, properly prepared the surface, and applied new stucco. The existing texture was carefully matched so the repaired section blends into the surrounding finish without an obvious seam.

What homeowners should know

Stucco is a rigid cement finish on a house that moves a little with temperature, moisture and age. Fine cracks are normal; the concern is when water gets behind the finish, because stucco that has lost its bond will bulge, sound hollow when tapped, and eventually fall away, taking the weather protection with it.

The maintenance that matters: inspect for cracks and seal small ones before they admit water; watch for bulging, loose or hollow-sounding areas, which mean the bond is failing; keep gutters and downspouts from running water down the wall; and avoid pressure washing, which drives water behind the finish. Where a section has already separated, removal and proper re-application is the repair that lasts.

Behncke’s masonry crews handle stucco, parging and surface-bonding work on older Quad Cities homes alongside brick and block repair; see masonry repair and what foundation parging is for related finishes.

Photo highlights

  • The repaired wall with the new texture blended into the old.
  • New stucco applied to the prepared section.
  • The failing stucco removed down to the structure beneath.

Related services

Stucco cracking or coming loose?

Behncke Construction repairs stucco on older homes and matches the existing texture. Contact us or call (563) 332-6045.